Wipe wall with the clean, damp cloth to prepare painting surface.
Lay down the drop cloth to protect floors; use Painter's tape to cover trim, molding, ceiling and any adjacent walls.
Apply paint just inside taped area with the angled brush, then paint remainder of the wall with the woven roller; remove Painter's tape while paint is still damp; allow paint to dry 24 hours.
Find the middle point of the wall and lightly mark 6 inches on either side with the pencil; from each of these marks, measure and mark 12-inch stripe intervals until you reach each corner of the wall.
Use the level and the pencil to lightly mark vertical lines the height of the wall.
Once stripes are drawn, starting at one end, place a small piece of tape inside every other stripe; the unmarked stripes are to be painted the accent color.
Affix Painter's tape along vertical lines, making sure the edge of the tape is positioned inside the marked stripes; apply pressure to tape to ensure a tight seal with wall.
Use the woven roller to paint between taped areas of unmarked stripes; roll as close to ceiling and trim as possible and fill in gaps with angled brush.
Remove the Painter's tape while paint is still damp; clean up any mistakes with the clean, damp cloth; allow paint to dry for 24 hours.